CROSSCO® FLOOR TILE ADHESIVE™Code #: PA007
Crossco® Ceramic Tile Adhesive is a synthetic based adhesive, suitable for applying ceramic tiles to concrete, plywood, gypsum and plaster. Ready to use formula,water resistant and easy-to-apply. Formulated for interior or exterior use.
Available in: ¼ US GAL, 1 US GAL, 5 US GAL
Floor Application: Spread with a wavy motion, using a 1/16” x 1/16” x 1/16” notched trowel for mosaic tile. For ceramic floors use a 3/32”x3/32”x1/8” notched trowel. Spread only the amount of adhesive that can be covered in fifteen minutes. Do not set tile after skin has formed on mastic. (This time will vary due to the temperature, humidity and subfloor conditions.) Apply tile with a slight twisting motion and tap firmly.
Wall Application: Spread mastic with a wavy motion, using a 3/16” x3 /16” x 3/16” notched trowel. Spread only the amount of adhesive that can be covered in thirty minutes. Do not set tile after skin has formed on mastic. (This time will vary due to temperature, humidity and subsurface conditions.) (2) Apply tile with a slight twisting motion and press firmly into place. Do not slide tile against each other. Start walls at top or bottom. Tile may be grouted two hours after installation. Showers may be used 24 hours after grouting has been completed. This adhesive is not recommended for setting ceramic fixtures.
- White Acrylic Latex
- No Stain
- Quick Grab
- Water Resistant
- Multipurpose Adhesive
- Professional Grade
- Easy to Use and Clean
- Appearance: White
- Solids: 63 ± 1%
- Wt/Gal: 12.4 lb.
- Specific Gravity: 1.02
- pH: 8-9
KEEP OUT OF REACH OF CHILDREN
For chemical emergencies only, call CHEMTREC
The manufacturer’s liability in connection with the sale of this product extends only to the replacement price.