Products

CROSSCO® FW2500™Code #: CK033

TDS

- Description

Crossco®  FW2500™  is a fast dry, ultra high solids, durable floor finish with exceptional buffability. Tests on high traffic floor produce wear levels dramatically superior to conventional floor polishes on the market today. This product requires minimum maintenance, resists scuff marks thus reducing labor costs.

Available in: ¼ US GAL, 1 US GAL, 5 US GAL

- Application

Strip all old finish from floor using CROSSCO WX1000 Stripper. Rinse well with cold water until no residue remains, and allow floor to dry thoroughly.

-Once floor is stripped and dust free, apply a coat of CROSSCO DP2000 Floor Sealer to seal porous condition created by the stripper.

-Apply 3-4 medium, even coats of CROSSCO FW2500. Allow 20-30 minutes of drying time between each coat, depending on environmental conditions. Do not apply more than 4 coats within 24 hours. Excess coats will delay drying time between coats and may result in increased stickiness and dirt retention.

-Floor may be opened to traffic 1 hour after final coat is applied.

– Allow finish to cure 48-72 hours after application before burnishing

- Advantages

  • Super High gloss finish
  • Could be used without sealer
  • Detergent resistant
  • For high traffic areas
  • Self leveling
  • Easy to apply

- Specifications

  • Color: White
  • Solids: 25.0± 0.5%
  • Weight/Gallon: 9.15 lbs./gal.
  • pH: 8.0-9.0

- Warnings

KEEP OUT REACH OF CHILDREN

For chemical emergency only, call Chemtrec 1- 800-424-9300.

The manufacturer’s liability in connection with the sale of this product extends only to the replacement price.