Products

CROSSCO® MAXXI SEAL™Code #: RS003

TDS

- Description

Crossco® Maxxi Seal™ is a fiber modified polyvinyl emulsion effective in waterproofing of roof and walls. Crossco® Maxxi Seal™ forms very hard plastic type membrane that seal all type leaks and filtration. Crossco® Maxxi Seal™ resists great changes of temperature and isolates the heat without cracking themselves or withdrawing. It is recommended in concrete roofs.

Available in: ¼ US GAL, 1 US GAL, 5 US GAL

- Application

Pressure wash the roof with a mild detergent. To remove all loose particles such as: Gravel, dust, old sealer, grease, wax and oil. remove the fungus, silt, mildew and algae with a mixture of water and Crossco® Crosscrete™; scrub the surface with a brush. Make sure to rinse the area well and leave it to dry completely. Apply on a clear and sunny day. Do not apply it after 3: 00 PM. or at low temperatures. Apply only at temperature above 50 ° F. Make sure to protect it from rain at least 6 hours after applied. Apply with a heavy nap roller or an airless sprayer. Place product on the surface and carefully apply at a rate which ensures uniform coverage. Drying depends upon the thickness, humidity, and temperature. Do not walk on the sealer until 24 hours after application and make sure that the sealant is completely dry before walking on it. Apply product in opposite directions. Do not dilute the product. Clean the equipments with soap and water.

- Advantages

  • Ultra White
  • Reflects UV Rays
  • Lower Interior Temperature
  • Seals and Protects
  • Fiber Reinforced
  • Water Clean Up

- Specifications

  • Color: White
  • Peso/Galón: 10.50 lbs
  • Sólidos/Peso: >48%
  • Viscosidad: 115 -120 kus
  • pH: 7-8

- Warnings

KEEP OUT OF REACH OF CHILDREN.

Avoid contact with eyes, skin and clothing. Keep out of reach of children. Keep container closed during storage. Harmful if swallowed. Eye Irritant. Refer to product Material Safety Data Sheet (MSDS) prior to product use.

For chemical emergency only, CALL CHEMTREC 1-800-424-9300.