Products
CROSSCO® EXTREME BOND TEXTURE™Code #: PB025
- Description
Crossco® Extreme bond texture™ is high solids concrete adhesive formulated with texture to bond new concrete to old without the laborious scarification process which is usually necessary. Stronger than most concrete, this powerful bonding agent will retain plasticity and never become brittle. Designed to increase adhesion of plaster in vertical walls.
Available in: ¼ US GAL, 1 US GAL, 5 US GAL
- Application
Extreme Bond Texture™ is ready to use. Apply a uniform coat of bonding agent to existing surface with brush, roller or airless spray. Make sure all areas are well covered with product. After application, allow 2 to 4 hours to dry before applying plaster/stucco to surface. Trowel on plaster/stucco on a circular motion. If product is left on surface longer than 48 hours, an additional coat is required. Mixing: Always mix thoroughly by hand or with a power agitator before application.
- Advantages
- Water Resistant
- Strong Bond
- Non- Toxic
- Water Clean Up
- Ready to Use
- Fast Dry
- Alkali Resistant
- High Solids
- Specifications
- Color: Purple (PB 025)
- Weight/ Gallon: 9.05 lbs +/-
- Solid/Weight: 45% +/- 1%
- Viscosity: 110- 120 ksu
- pH: 8.5
- Warnings
KEEP OUT OF REACH OF CHILDREN.
Avoid contact with eyes, skin and clothing. Keep out of reach of children. Keep container closed during storage. Harmful if swallowed. Eye Irritant. Refer to product Material Safety Data Sheet (MSDS) prior to product use.
For chemical emergency only, CALL CHEMTREC 1-800-424-9300.