CROSSCO® WATER GUARD™Code #: WP022
Crossco® Water Guard™ is an Interior/Exterior 100% Acrylic Waterproof Masonry Coating modified with Ceramic Microspheres Technology design, to waterproof a variety of surfaces against water, damp and leaks. Crossco® Water Guard™ is a hydrophilic acrylic latex flat coating for interior or exterior use ( above or below grade level).
Disponible en: 1 US GAL, 5 US GAL
Stir thoroughly before and during application. Always paint the shadow side of the building first. Do not dilute Crossco® Water Guard™ use as supplied. Do not apply if temperature are lower than 50F or rain is expected in the next 5 hours. Do not apply on wet surfaces. Make sure the first coat is completely dry before touching up.
- 3 in 1 Sealer-Primer- Paint
- Available Flat & Satin Finish
- Bio Pruf Technology
- Stain Resistant
- Energy Saving
- Provides a Waterproof Barrier
- Water Clean Up
- Appearance: Ultra White
- Odor: Characteristic
- Specific Gravity: 1.40
- Weight/gallon: 11.60 lbs.
- Solids: 56% ± 1 by weight
- Viscosity: 90-100 KU
KEEP OUT REACH OF CHILDREN
Contains 100% Acrylic resin and can cause irritation of the eyes, nose, throat and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If ingested accidentally visit a doctor immediately. Use only with adequate ventilation.
For chemical emergency only, call Chemtrec 1- 800-424-9300