Products
CROSSCO® ES-2000 PLUS™ ULTRA WHITE USACode #: RS050
- Description
Crossco® ES 2000 Plus Ultra White™ is a single component, 100% acrylic sealer & roof coating. It provides an Ultra White Finish which lowers the temperature to the interior of homes, industrial and commercial buildings. ES-2000 PLUS will not crack or peel despite severe weather or joint movement.
Available in: 5 US GAL
- Application
Brush/Roll: Soft brushes or a 3⁄4”nap roller may be used. May require multiple coats to achieve proper coverage.
Airless Spray: Use an airless pump with pressure of 1,500 to 2,000 psi. A fluid delivery of 1 to 2 gallons per minute with a spray tip of .026 to .035 with a fan angle of 60° will be adequate. Wait 4 hours between coats. The hoses should be at least 3/8″ inside diameter and of the high pressure rate type. If the hose length is more than fifty feet, a larger inside diameter will be required. The longer the hose the smaller the tip orifice size.
- Advantages
- 2 in 1 Primer & Sealer
- Reflects UV & Sun’s Heat Rays
- Lowers Interior Temperature
- Seals & Protects
- Bright White Finish
- Water Clean Up
- Specifications
- Color: Ultra White
- Solids: <60%
- Weight/Gallon: 12.28 lb./GAL
- Viscosity: 115 sku
- pH: 9-10
- Warranty: 10 Years
- Warnings
Keep out reach of children
For chemical emergency only, call Chemtrec 1- 800-424-9300.
Contains 100% acrylic resin and can cause irritation of the eyes, nose, throat and skin. In case of contact, rinse with water.