CROSSCO® MAX-FLEX 5500™Code #: RS106


- Description

Crossco® Max Flex 5500™ is a water-based sealer 100% elastomeric of a single component, that has been designed with a fibers that provide volume, hardness and give a uniform appearance to surface simultaneously that conserves 100% elasticity and balance between properties. This high performance coating resist cracking, peeling, applies blue and dries to a white finish, providing excellent waterproofing capabilities.

Available in: 5 US GAL

- Application

Pressure wash the roof with a mild detergent. To remove all loose particles such as: Gravel, dust, old sealer, grease, wax and oil. remove the fungus, silt, mildew and algae with a mixture of water and Crossco® Crosscrete™; scrub the surface with a brush. Make sure to rinse the area well and leave it to dry completely. Apply on a clear and sunny day. Do not apply it after 3: 00 PM. or at low temperatures. Apply only at temperature above 50 ° F. Make sure to protect it from rain at least 6 hours after applied. Apply with a heavy nap roller or an airless sprayer. Place product on the surface and carefully apply at a rate which ensures uniform coverage. Drying depends upon the thickness, humidity, and temperature. Do not walk on the sealer until 24 hours after application and make sure that the sealant is completely dry before walking on it. Apply product in opposite directions. Do not dilute the product. Clean the equipments with soap and water.

- Advantages

  • Applies Blue- Dries White
  • Silicone Modifies
  • Excellent Adhesion
  • Fiber Reinforced
  • 2 in 1 Primer and Sealer
  • Reflects UV & Sun’s Heat Rays
  • Lower Interior Temperature
  • Mildew Resistant

- Specifications

  • Color: Applies Blue, Dries White
  • Weight/Gal: 11.19 lbs
  • Solids/Weight: 60% +/- 2%
  • Viscosity: 125 kus
  • pH: 9-10

- Warnings


Avoid contact with eyes, skin and clothing. Keep out of reach of children. Keep container closed during storage. Harmful if swallowed. Eye Irritant. Refer to product Material Safety Data Sheet (MSDS) prior to product use.

For chemical emergency only, CALL CHEMTREC 1-800-424-9300.