1067 CROSSCO® WATER GUARD™ – CROSSCO Puerto Rico

Products

CROSSCO® WATER GUARD™Code #: WP022

TDS

- Description

Crossco® Water Guard™ is an Interior/Exterior 100% Acrylic Waterproof Masonry Coating modified with Ceramic Microspheres Technology design, to waterproof a variety of surfaces against water, damp and leaks. Crossco® Water Guard™  is a hydrophilic acrylic latex flat coating for interior or exterior use ( above or below grade level).

Disponible en: 1 US GAL, 5 US GAL

- Application

Stir thoroughly before and during application. Always paint the shadow side of the building first. Do not dilute Crossco® Water Guard™ use as supplied. Do not apply if  temperature are lower than 50F or rain is expected in the next 5 hours. Do not apply on wet surfaces. Make sure the first coat is completely dry before touching up.

- Advantages

  • 3 in 1 Sealer-Primer- Paint
  • Available Flat & Satin Finish
  • Bio Pruf Technology
  • Stain Resistant
  • Energy Saving
  • Provides a Waterproof Barrier
  • Water Clean Up

- Specifications

  • Appearance: Ultra White
  • Odor: Characteristic
  • Specific Gravity: 1.40
  • Weight/gallon: 11.60 lbs.
  • Solids: 56% ± 1 by weight
  • Viscosity: 90-100 KU

- Warnings

KEEP OUT REACH OF CHILDREN

Contains 100% Acrylic resin and can cause irritation of the eyes, nose, throat and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If ingested accidentally visit a doctor immediately. Use only with adequate ventilation.

For chemical emergency only, call Chemtrec 1- 800-424-9300