CROSSCO® FLOOR & CERAMIC TILE ADHESIVE™Code #: AD096
Crossco® Premium Grade Adhesive™ is a water resistant and strong multi purpose adhesive for the installation of interior floor covering materials such as vinyl, vinyl asphalt, carpet tiles, sponged-backed vinyl sheet goods and indoor carpeting.
Available in: ¼ US GAL, 1 US GAL, 5 US GAL
Floor Application: Spread mastic with a wavy motion, using a 1/16” x 1/16” x 1/16” notched trowel for mosaic tile. For ceramic floors use a 3/32”x3/32”x1/8” notched trowel. Spread only the amount of adhesive that can be covered in fifteen minutes. Do not set tile after skin has formed on mastic. (This time will vary due to the temperature, humidity and subfloor conditions.) Apply tile with a slight twisting motion and tap firmly.
Wall Application: Spread mastic with a wavy motion, using a 3/16” x3 /16” x 3/16” notched trowel. Spread only the amount of adhesive that can be covered in thirty minutes. Do not set tile after skin has formed on mastic. (This time will vary due to temperature, humidity and subsurface conditions.) (2) Apply tile with a slight twisting motion and press firmly into place. Do not slide tile against each other. Start walls at top or bottom. Tile may be grouted two hours after installation. Showers may be used 24 hours after grouting has been completed. This adhesive is not recommended for
- Ready to Use
- Non- Flammable
- Smooth Spreadability
- Long Open Time
- Strong Bond
- Water Clean Up
- Color: Light Bone
- Weight/Gal: 11.70 lbs.
- Solids/ Weight: 65 +/- 1%
- Viscosity: 450,000 cps
- pH: 9
KEEP OUT OF REACH OF CHILDREN.
Avoid contact with eyes, skin and clothing. Keep out of reach of children. Keep container closed during storage. Harmful if swallowed. Eye Irritant. Refer to product Material Safety Data Sheet (MSDS) prior to product use.
For chemical emergency only, CALL CHEMTREC 1-800-424-9300.