1179 CROSSCO® EZ SEAL SYSTEM SEALER™ – CROSSCO Puerto Rico

Productos

CROSSCO® EZ SEAL SYSTEM SEALER™Código #: RS032

TDS

- Descripción

Crossco® EZ Seal System Sealer™  is a fast dry white sealer, professional grade, elastomeric coating with Thermal Crystal Technology (TCT) that bonds easily to many surfaces. It works as primer and sealer forming an elastic membrane that remains flexible and resist cracking and peeling. The fast dry technology allows for a two coats application on the same day.

Available in: 5 US GAL

- Aplicación

Pressure wash the roof with a mild detergent. To remove all loose particles such as: Gravel, dust, old sealer, grease, wax and oil. remove the fungus, silt, mildew and algae with a mixture of water and Crossco® Crosscrete™; scrub the surface with a brush. Make sure to rinse the area well and leave it to dry completely. Apply on a clear and sunny day. Do not apply it after 3: 00 PM. or at low temperatures. Apply only at temperature above 50 ° F. Make sure to protect it from rain at least 6 hours after applied. Apply with a heavy nap roller or an airless sprayer. Place product on the surface and carefully apply at a rate which ensures uniform coverage. Drying depends upon the thickness, humidity, and temperature. Do not walk on the sealer until 24 hours after application and make sure that the sealant is completely dry before walking on it. Apply product in opposite directions. Do not dilute the product. Clean the equipments with soap and water.

- Ventajas

  • 2 in 1 Primer & Sealer
  • Reflects UV & Heat Rays
  • Lowers Interior Temperature
  • Applies Blue – Dries White
  • TCT » Thermal Crystal Technology»
  • Two Coats in One Day

- Especificaciones

  • Appearance: Blue liquid – Dries white
  • Solids: <65% +/- 2%
  • Specific gravity: 1.47
  • Weight/Gallon: 12.08 lbs.
  • pH: 9.5 – 10.5

- Advertencias

Keep out reach of children

Contains 100% acrylic resin and can cause irritation of the eyes, nose, throat and skin. In case of contact, rinse with water.

For chemical emergency only, call Chemtrec 1- 800-424-9300.